Installation Guide For LG D2342P Cinema 3D

Attaching the Stand Base

1. Place the Monitor set with the screen side down on a flat and cushioned surface.

Note: Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”.

Hinge_stand_body_lg_monitor

3. Attach the Stand Base and then tighten the screw to the right with a Coin. stand_base_lg_monitor

Detaching the Stand Base and Body

  1. Place the Monitor set with the screen side down on a flat and cushioned surface.
  2. Pull out the Stand Base and Stand Body from the Monitor set.Base_stand_of_monitor lg
  3. Turn the screw to the left with a Coin, and then pull out the Stand Base from the Stand Body.monitor's_body_standNote: This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

USING THE LG D2342P MONITOR SET

Connecting to a PC

1. Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

PC's_Dsub_connector_image

 

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

Pc's_DIV_Connector_image

HDMI connection

Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.

pc's+hdmi_connector_image